Description
3M Scotch-Weld Structural Plastic Adhesive DP8005 Off-White, 45mL Duo-Pak, 12 per case
Medium Viscosity Allows Controlled Dispensing
Our 3M Scotch-Weld Acrylic Adhesive DP8005 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 minute work life. The adhesive reaches handling strength in approximately 3 hour and is fully cured in 24 hours (at 72°F/22°C).
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
Recommended Applications
3M Scotch-Weld Structural Plastic Adhesive DP8005 Off-White, 45mL Duo-Pak, 12 per case
3M Scotch-Weld Structural Plastic Adhesive DP8005 is a two-part acylic-based adhesive. 10:1 mix ratio, 3 minute work life and handling strength in approximately 3 hours. 3M Scotch-Weld EPX Plus II applicator and mix nozzles are required (not included). 3M Scotch-Weld Structural Plastic Adhesive DP8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.
- Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics composites and metals
- Medium viscosity allows controlled dispensing
- 3 minute work life with 3 hours handling strength
- Strong adhesive can replace screws, rivets and welding
Medium Viscosity Allows Controlled Dispensing
Our 3M Scotch-Weld Acrylic Adhesive DP8005 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 minute work life. The adhesive reaches handling strength in approximately 3 hour and is fully cured in 24 hours (at 72°F/22°C).
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
Recommended Applications
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
Browse for more products in the same category as this item: 3M Scotch-Weld Epoxy Adhesives
Product ID: Scotch-Weld DP8005 UPC: 00-051128-99349-1, 00051128993491 Stock ID: 62-2786-1445-8, 62278614458
Product ID : DP8005
Brand : Scotch-Weld
Chemical Base : Acrylic
Color : Off-White
Container Volume : 45 Millilitre
Full Cure : 8-24 hours @ 72 F (22 C)
Hardness : 60 Shore D
Mix Ratio Volume Base:Accelerator : 12/31/1899 10:01:00 AM
Peel Strength at 72 Degrees F (22 Degrees C) : 17 Pound Per Inch (Of Width)
Physical Form : Flowable Liquid
Product Form : Each
Push To GSDB : True
Shear Strength at 72 Degrees F (22 Degrees C) : 2400 Pound-Force Per Square Inch
Shelf Life : 6 Month
Specific Gravity : 0.99
Storage Temperature : 40 Degree Fahrenheit
Time to Handling Strength : 3 Hour
Units per Case : 12
Viscosity Range (cps) at Room Temperature : 25000
Units per Pallet : 4200 Each
Harmonizing Code : 3506105000
ECCN : EAR99
Brand : Scotch-Weld
Chemical Base : Acrylic
Color : Off-White
Container Volume : 45 Millilitre
Full Cure : 8-24 hours @ 72 F (22 C)
Hardness : 60 Shore D
Mix Ratio Volume Base:Accelerator : 12/31/1899 10:01:00 AM
Peel Strength at 72 Degrees F (22 Degrees C) : 17 Pound Per Inch (Of Width)
Physical Form : Flowable Liquid
Product Form : Each
Push To GSDB : True
Shear Strength at 72 Degrees F (22 Degrees C) : 2400 Pound-Force Per Square Inch
Shelf Life : 6 Month
Specific Gravity : 0.99
Storage Temperature : 40 Degree Fahrenheit
Time to Handling Strength : 3 Hour
Units per Case : 12
Viscosity Range (cps) at Room Temperature : 25000
Units per Pallet : 4200 Each
Harmonizing Code : 3506105000
ECCN : EAR99