Item Number : INFRA PAC-45
Description: PAC-Series, High Profile, Platform Automatic Conveyorized Stretch Wrapper
Unit of Measure : EA
Qty Per Package : 1
Weight Per Unit : 4950
|
|
| Detail : |
| The PAC-Series stretch wrapper is equipped with a 84" diameter conveyorized turntable for a 4,000Lb. load capacity. This fully automatic stretch wrapping system has the TIEGR film tail capture system leaving no film tails to worry about. |
| Conveyor Speed : |
|
35 FPM |
| Film Delivery System : |
Variable Carriage Speed, Up & Down (0-21 FPM)
EZ-Load FLM SAVR Powered Pre-Stretch 150% - 300%, 200% Standard
Film Delivery: 1/2 HP, 90 VDC Motor
Photo Electric Load Height Sensing for Dark Colored Loads
Corner Compensation
2 Wrap Patterns and bypass mode
Anti-static Rollers
TIE-GR Film Tail Capture System with Roping Device
Dual Chain Carriage Lift System |
| Frame Construction : |
Heavy-Duty Reinforced Structural Steel Construction for Around-The-Clock Operation
Steel-It Paint Provides a Durable Scratch Resistanct Surface and Prevents Corrosion |
| Machine Video : |
|
Coming Soon! |
| Maximum Load Weight : |
|
4000 lbs. |
| Performance Criteria : |
Allen-Bradley Micrologix PLC
User-friendly Operator Controls with Dual LED Wrap Counters
Built in Self-diagnostics
Electronically Controlled Film Tension Adjustment
Dust tight NEMA 12 Enclosure
Top Over-wrap Control Feature
Manual Conveyor Controls
Mechanical Lock Holds Turntable in Position During Load, Infeed and Exits
42" Safety Fencing with Interlock Access Doors
Automatic Film Clamp and Cut Device with Manual Override Control
Film Fault Alarm that Singals Empty Film Roll, Film Brakes, or that Equipment Needs Attention
Carriage Pause Control (Banding)
Positive Home Position Alignment
Photo Electric Load Height Sensing
Adjustable Top and Bottom Wrap Counter (0-9)
2 Wrap pattern Selections
Average Cycle Time 2 Min (Based on 3 bottom & 3 top wraps)
Forklift Portable
Maximum Load Size: 50" x 50" x 65" Above 18" Conveyor
Minimum Load Size: 30" x 30" x 24" |
| Power Requirements : |
Electrical: 220V / 1 Phase / 60Hz / 20 AMPS
Pneumatic: 80 PSI, 3 CFM
External Fuses
UL Approved Components |
| Turntable Construction : |
|
3/8" x 50" Square Steel T/T |
| Turntable Conveyor : |
|
52" x 2.5" Diameter Rolls, 11 Gauge Steel with 11/16" Hex Shafts |
| Turntable Drive : |
3/4 HP, DC Motor with ANSI 60 Direct Chain Drive
Variable T/T Acceleration (Soft Start) |
| Turntable Height : |
|
13-3/4" |
| Turntable Speed : |
|
Variable, 0-15 RPM |
|
|
){kind=link}