3M Anisotropic Conductive Film Adhesive 7303, 8 mm x 35 m
- Heat cure
- Thermo-set low temperature cure
- Tacky at room temperature
- Good thermal stability
- Reworkable
- Frozen storage
3M ACF 7303 is an epoxy/acrylate-blend adhesive system filled with 43 micron silver-coated glass beads. It is slightly tacky at room temperature and cures at modest bonding temperature and pressure.
The unbonded film is slightly tacky at room temperature and consists of a thermosetting epoxy/acrylate adhesive matrix randomly loaded with conductive particles. These particles allow interconnection of circuit lines through the adhesive thickness, but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. Hard conductive particles are preferred for copper traces, as they embed into traces for good electrical performance. 3M ACF 7303 may be used to bond a flexible printed circuit to another flexible printed circuit or to a printed circuit board.
Product ID: 3M 7303 UPC: 00-048011-57368-7, 00048011573687 Stock ID: 70-0063-3596-5, 70006335965, 7010312589
Brand : 3M™
Curing Temperature (Celsius) : 140.0 Degree Celsius
Curing Temperature (Fahrenheit) : 284.0 Degree Fahrenheit
ETIM Class 8.0 : EC000128
Maximum Operating Temperature (Celsius) : 80.0 Degree Celsius
Maximum Operating Temperature (Fahrenheit) : 177.0 Degree Fahrenheit
Minimum Operating Temperature (Celsius) : -40.0 Degree Celsius
Minimum Operating Temperature (Fahrenheit) : -40.0 Degree Fahrenheit
Overall Length (Imperial) : 38.3 yd
Overall Length (Metric) : 35.0 m
Overall Width (Imperial) : 0.3 in
Overall Width (Metric) : 8.0 mm
Shear Strength : 7.1 psi
Harmonizing Code : 3506910000
ECCN : EAR99