Description
3M Flexible Diamond Hand Lap 6200J, 2-1/4 in x 3-3/4 in R10 Micron, 10 per case
3M Flexible Diamond Hand Lap 6200J is a good match for finishing applications that require aggressive sanding, such as highlighting body-in-white automotive defects. Because diamond mineral cuts fast and sharp, 3M Flexible Diamond Hand Lap 6200J minimizes the level of manual pressure needed to get the job done.
Comfortable Hand-Held Design
3M Flexible Diamond Hand Lap 6200J was ergonomically designed to enhance operator comfort. The contoured foam backing assists with grip, so an even level of pressure may be applied over the surface area. Additionally, because Diamond Hand Lap 6200J is hand-held it can easily get into those stubborn, hard-to-reach areas.
Benefits of an Open Dot Pattern
The diamond mineral on 3M Flexible Diamond Hand Lap 6200J is adhered to a premium flexible backing in an open dot pattern. The open dot pattern allows swarf to escape, so debris will not clog the mineral. This helps sustain a sharp cut and prolong abrasive service life. The premium flexible backing conforms to the substrate and responds to surface irregularities, so you can finish contoured surfaces. 3M Flexible Diamond Hand Lap 6200J comes in a variety of grades tailored to meet specific project needs. Metal bond grades are available in 250, 125, 74, 40, 20 and 10 microns. Bigger microns signal bigger minerals, so these grades are good for heavy, fast stock removal. Smaller grades are best for fine finishing.
3M Flexible Diamond Hand Lap 6200J, 2-1/4 in x 3-3/4 in R10 Micron, 10 per case
For hard to grind material, stone, glass, ceramic, metal, carbide, composites. Tough resin bond securely anchors micron graded diamonds to backing. Use on wet or dry applications. Durability improves when used with water or oil lubricants. 3M Flexible Diamond Hand Lap 6200J is a versatile hand-held abrasive that optimizes the sharp cutting action of diamond mineral to grind and finish many materials, including chilled iron, granite, carbide, composites, non-ferrous metals, thermal spray coatings and exotic alloys.
- Ideal for finishing, polishing, blending and deburring
- Available in a range of grades tailored to meet different project needs
- Portable abrasive makes finishing in hard-to-reach areas achievable
- Contoured, hand-held foam backing ergonomically designed for better comfort
- Open dot diamond pattern permits debris and swarf to escape, so mineral keeps cutting fast and sharp
3M Flexible Diamond Hand Lap 6200J is a good match for finishing applications that require aggressive sanding, such as highlighting body-in-white automotive defects. Because diamond mineral cuts fast and sharp, 3M Flexible Diamond Hand Lap 6200J minimizes the level of manual pressure needed to get the job done.
Comfortable Hand-Held Design
3M Flexible Diamond Hand Lap 6200J was ergonomically designed to enhance operator comfort. The contoured foam backing assists with grip, so an even level of pressure may be applied over the surface area. Additionally, because Diamond Hand Lap 6200J is hand-held it can easily get into those stubborn, hard-to-reach areas.
Benefits of an Open Dot Pattern
The diamond mineral on 3M Flexible Diamond Hand Lap 6200J is adhered to a premium flexible backing in an open dot pattern. The open dot pattern allows swarf to escape, so debris will not clog the mineral. This helps sustain a sharp cut and prolong abrasive service life. The premium flexible backing conforms to the substrate and responds to surface irregularities, so you can finish contoured surfaces. 3M Flexible Diamond Hand Lap 6200J comes in a variety of grades tailored to meet specific project needs. Metal bond grades are available in 250, 125, 74, 40, 20 and 10 microns. Bigger microns signal bigger minerals, so these grades are good for heavy, fast stock removal. Smaller grades are best for fine finishing.
Product ID: 3M 6200J UPC: 00-051144-80102-2, 00051144801022 Stock ID: 60-9800-1307-6, 60980013076
Product ID : 6200J
Brand : 3M(TM)
Color : Blue
Grade : R10
Length : 3.75 Inch
Length (metric) : 95.25 Millimetre
Product Form : Hand Tool Specialties
Push To GSDB : True
Width : 2.25 Inch
Width (metric) : 57.15 Millimetre
Units per Pallet : 3360 Each
Harmonizing Code : 6805100000
ECCN : EAR99
Brand : 3M(TM)
Color : Blue
Grade : R10
Length : 3.75 Inch
Length (metric) : 95.25 Millimetre
Product Form : Hand Tool Specialties
Push To GSDB : True
Width : 2.25 Inch
Width (metric) : 57.15 Millimetre
Units per Pallet : 3360 Each
Harmonizing Code : 6805100000
ECCN : EAR99