Description
3M Scotch-Weld Structural Plastic Adhesive DP8005 Black, 45 mL Duo-Pak, 12 per case
Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M Scotch-Weld Structural Plastic Adhesive DP8005 bonds metals, ceramics, and wood and most other plastics. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.
3M Scotch-Weld Structural Plastic Adhesive DP8005 Black, 45 mL Duo-Pak, 12 per case
3M Scotch-Weld Structural Plastic Adhesive DP8005 is a two-part acylic-based adhesive. 10:1 mix ratio, 3 minute work life and handling strength in approximately 3 hours. 3M Scotch-Weld EPX Plus II applicator and mix nozzles are required (not included). 3M Scotch-Weld Structural Plastic Adhesive DP8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.
- Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics composites and metals
- Medium viscosity allows controlled dispensing
- 3 minute work life with 3 hours handling strength
- Strong adhesive can replace screws, rivets and welding
Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M Scotch-Weld Structural Plastic Adhesive DP8005 bonds metals, ceramics, and wood and most other plastics. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.
Recommended Applications
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
Product ID: Scotch-Weld DP8005 UPC: 00-051111-92166-1, 00051111921661 Stock ID: 62-2779-1445-3, 62277914453
Product ID : DP8005
Brand : Scotch-Weld
Chemical Base : Acrylic
Color : Black
Container Volume : 45 Millilitre
Full Cure : 8-24 hours @ 72 F (22 C)
Hardness : 60 Shore D
Mix Ratio Volume Base:Accelerator : 12/31/1899 10:01:00 AM
Peel Strength at 72 Degrees F (22 Degrees C) : 17 Pound Per Inch (Of Width)
Physical Form : Flowable Liquid
Product Form : Each
Push To GSDB : True
Shear Strength at 72 Degrees F (22 Degrees C) : 2400 Pound-Force Per Square Inch
Shelf Life : 6 Month
Specific Gravity : 0.99
Storage Temperature : 40 Degree Fahrenheit
Time to Handling Strength : 3 Hour
Units per Case : 12
Viscosity Range (cps) at Room Temperature : 25000
Units per Pallet : 4200 Each
Harmonizing Code : 3506105000
ECCN : EAR99
Brand : Scotch-Weld
Chemical Base : Acrylic
Color : Black
Container Volume : 45 Millilitre
Full Cure : 8-24 hours @ 72 F (22 C)
Hardness : 60 Shore D
Mix Ratio Volume Base:Accelerator : 12/31/1899 10:01:00 AM
Peel Strength at 72 Degrees F (22 Degrees C) : 17 Pound Per Inch (Of Width)
Physical Form : Flowable Liquid
Product Form : Each
Push To GSDB : True
Shear Strength at 72 Degrees F (22 Degrees C) : 2400 Pound-Force Per Square Inch
Shelf Life : 6 Month
Specific Gravity : 0.99
Storage Temperature : 40 Degree Fahrenheit
Time to Handling Strength : 3 Hour
Units per Case : 12
Viscosity Range (cps) at Room Temperature : 25000
Units per Pallet : 4200 Each
Harmonizing Code : 3506105000
ECCN : EAR99