Description
3M Scotch-Weld Structural Plastic Adhesive DP8010, Blue, 45 mL Duo-Pak, 12/case
3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.
Recommended Applications
Our 3M Scotch-Weld Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
3M Scotch-Weld Structural Plastic Adhesive DP8010, Blue, 45 mL Duo-Pak, 12/case
- Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
- Medium viscosity allows controlled dispensing
- 10 minute work life with 60 minute handling strength
- Strong adhesive can replace screws, rivets and welding
3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.
Recommended Applications
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
Our 3M Scotch-Weld Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
Browse for more products in the same category as this item: 3M Scotch-Weld Epoxy Adhesives
Product ID: 3M DP8010 UPC: 00-051115-71600-3, 00051115716003 Stock ID: 62-2863-1445-5, 62286314455, 7100036717
Product ID : DP8010
Industries : Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Viscosity : Self-Leveling
Shelf Life in Months (From Date of Manufacture) : 12
Indoor/Outdoor : Both
Full Cure Time : 8-24 Hours @ 72 F (22 C)
Volume (Metric) : 45 mL
Substrate 1 : Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
Substrate 2 : Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
Viscosity Range (cps) at Room Temperature : 20,000
Design Challenges : Noise Vibration & Harshness Control NVH
Storage Temperature (Celsius) : 4 °C
Work Time : 8 Minutes
Maximum Operating Temperature (Fahrenheit) : 250 Degree Fahrenheit
Volatile Organic Compounds (VOCs) : See Safety Data Sheet, Regulatory Data Sheet
Adhesive Type : Acrylic
Storage Temperature : <=40 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator : 10 : 1
Product Form : Cartridge
Shear Strength : 2700 Pound-Force Per Square Inch
Position : Best
Product Color : Blue
Physical Form : Flowable Liquid
Hardness : 55-60 Shore D
Brand : 3M™
Volume (Imperial) : 1.58 fl oz
Open Time : 10 Minute
Product Type : Structural Plastic Adhesive
Set Time : 60 Minute
Specific Gravity : 1.01
Units per Pallet : 3072 Each
Harmonizing Code : 3506105000
ECCN : EAR99
Industries : Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military & Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Viscosity : Self-Leveling
Shelf Life in Months (From Date of Manufacture) : 12
Indoor/Outdoor : Both
Full Cure Time : 8-24 Hours @ 72 F (22 C)
Volume (Metric) : 45 mL
Substrate 1 : Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
Substrate 2 : Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Nylon - Fiber Reinforced, Paint, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood, Wood & Hardboard
Viscosity Range (cps) at Room Temperature : 20,000
Design Challenges : Noise Vibration & Harshness Control NVH
Storage Temperature (Celsius) : 4 °C
Work Time : 8 Minutes
Maximum Operating Temperature (Fahrenheit) : 250 Degree Fahrenheit
Volatile Organic Compounds (VOCs) : See Safety Data Sheet, Regulatory Data Sheet
Adhesive Type : Acrylic
Storage Temperature : <=40 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator : 10 : 1
Product Form : Cartridge
Shear Strength : 2700 Pound-Force Per Square Inch
Position : Best
Product Color : Blue
Physical Form : Flowable Liquid
Hardness : 55-60 Shore D
Brand : 3M™
Volume (Imperial) : 1.58 fl oz
Open Time : 10 Minute
Product Type : Structural Plastic Adhesive
Set Time : 60 Minute
Specific Gravity : 1.01
Units per Pallet : 3072 Each
Harmonizing Code : 3506105000
ECCN : EAR99
Technical Documentation
Safety Data Sheet
Safety Data Sheet