3M FireDam Spray 200, Red, 5 gallon, Pail, 1/case
Sprayable water-based material, that dries to form a durable, elastomeric firestop coating. This material, when used as part of an assembly, will firestop building joints, perimeter joints (curtain wall), and through penetration seals. Provides up to 4-hour fire protection in construction joints. Red spray (also available in gray), - 50% movement capabilities. This firestop spray helps prevent the spread of fire, smoke and noxious gas. In addition, this product acts as an acoustic barrier by minimizing noise transfer (STC-Rating of 56 when tested in a STC 56-rated wall assembly) and meets the intent of LEED VOC environmental guidelines. Note: when tested at 50% movement for 100 cycles in a 4-inch joint, product remained elastomeric and did not show signs of cracking. The coating complies with the current requirements of the International Building Code (IBC), NFPA 5000 and NFPA 101. It has been fire tested and evaluated for use in construction joints under the pass/fail criteria of ASTM E 1966 (UL 2079), for Perimeter Joints under the pass/fail criteria of ASTM E 2307 and for Through Penetrations under the pass/fail criteria of ASTM E 814 (UL 1479) Standard.
Effective Fire Protection in a Flexible, Durable Coating
Formulated for flexibility that stays where it's sprayed, our 3M FireDam Spray 200 controls the transmission of fire, heat, smoke and noxious gasses before, during and after exposure to fire. It provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079) and up to 2-hour protection for through penetration systems per ASTM E 814 (UL 1479) & CAN/ULC-S115. It also provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307. This firestop coating is Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors and fire-rated walls. It also minimizes noise transfer (STC Rating of 56 when tested in a STC 56-rated wall assembly).
Easy Spray-On Fire Protection
Our water-based, easy-cleanup 3M FireDam Spray 200 is applied using conventional airless sprayers. Applied as a 1/8" (3mm) coating, it dries quickly to a uniform seal in a variety of conditions. It is also freeze and thaw resistant, helping to ensure consistent firestop in a range of conditions during construction. 3M FireDam Spray 200 is available in a distinct red for easy identification, or a dark gray to match existing surroundings.
- Provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079)
- Provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307
- Highly elastic sealer is compression/extension tested up to ± 50% of nominal joint width without cracking
- Resists freezing and thaws for a consistent seal in a range of conditions
- Water-based formula cleans up easily and saves time
Browse for more products in the same category as this item: FireDam Spray
Product ID: 3M 200 UPC: 00-051115-18798-8, 00051115187988 Stock ID: 98-0400-5588-5, 98040055885
Color : Red
Container Volume : 5 Gallon (US)
Units per Pallet : 36 Pail
Harmonizing Code : 3209100000
ECCN : EAR99