Description
3M Scotchgard Multi-Layer Protective Film 1004, 55.45 in x 29.32 in, 20 per case
A four-layer, optically transparent, pressure sensitive polyester film tape designed to protect the interior of public transportation vehicle windows from intentional mutilations, scratching and etching. Scotchgard Multi-Layer Protective Film for Glass designed to protect the interior of public transportation vehicle windows from intentional mutilations, scratching and etching. A defaced film layer can be quickly and easily removed, exposing a fresh protective layer.
Applications
3M Scotchgard Multi-Layer Protective Films 1004 protects glass, metal and other surfaces that are subject to damage from scratching, cutting, abrasion or chemical etching. Used for protecting smooth, flat surfaces such as public transportation windows and doors, transit kiosks, shelters, displays, mirrors and elevators.
Application Techniques
Application Information
Storage and Shelf Life
Product ID: Scotchgard 1004 UPC: 00-021200-96951-5, 00021200969515 Stock ID: 70-0063-5092-3, 70006350923
3M Scotchgard Multi-Layer Protective Film 1004, 55.45 in x 29.32 in, 20 per case
- Multi-layer construction reduces total application and removal costs versus single layer protection.
- Thick polyester film construction prevents typical scratches from affecting layers below.
- Film protects glass from chemical etching agents such as Bath EtchTM or Armour EtchTM.
- Film on glass meets ASTM E162, ASTME662, FMVSS-302 and Bombardier SMP 800-C requirements.
- Durable top-coat layer prevents light scratches caused by installation, wiping, cleaning or abrasion.
- Optimized adhesive provides easy, clean removal from glass and most other surfaces.
- Optimized inter-layer adhesive provides firm, adequate adhesion yet fast and easy removal.
- High clarity construction provides glass-like appearance.
A four-layer, optically transparent, pressure sensitive polyester film tape designed to protect the interior of public transportation vehicle windows from intentional mutilations, scratching and etching. Scotchgard Multi-Layer Protective Film for Glass designed to protect the interior of public transportation vehicle windows from intentional mutilations, scratching and etching. A defaced film layer can be quickly and easily removed, exposing a fresh protective layer.
Applications
3M Scotchgard Multi-Layer Protective Films 1004 protects glass, metal and other surfaces that are subject to damage from scratching, cutting, abrasion or chemical etching. Used for protecting smooth, flat surfaces such as public transportation windows and doors, transit kiosks, shelters, displays, mirrors and elevators.
Application Techniques
- For best results, surface must be clean and free of dirt, debris and oils and should be applied when surface temperature exceeds 50°F (10°C).
- Use of an application solution and 3M Heavy Duty Squeegee is suggested for easy positioning and squeegee application.
- Removal of film layers immediately after wet application is not recommended.
- Use of film removal tool is recommended for easy peel-back of target layer.
Application Information
- Some acrylic and polycarbonate substrates have low surface energy coatings and/or may out-gas, leading to bubbling or adhesion issues. Test before use.
- Not approved as glazing material for windshields requiring conformance to Federal Code 49 CFR 571.205. This standard applies to passenger cars, multi- purpose passenger vehicles, trucks, buses, motorcycles, slide-in campers and pick-up covers.
- May be used outdoors for short term use (typically <1 year) with minimal change in haze, clarity, light transmission and minimal adhesive residue left on most surfaces. Some exposure conditions (e.g. direct sun facing, higher temperatures) may shorten performance.
- Blocks more than 98% of UV light that can degrade plastics and fabrics.
- Note: Removal of film layer generates static charge.
Storage and Shelf Life
- Store flat under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in the original carton.
- To obtain best performance, use this product within 24 months from date of manufacture.
Product ID: Scotchgard 1004 UPC: 00-021200-96951-5, 00021200969515 Stock ID: 70-0063-5092-3, 70006350923
Product ID : 1004
Units per Pallet : 25 Case
Harmonizing Code : 3919905040
Units per Pallet : 25 Case
Harmonizing Code : 3919905040